You can order all your laser-cut plastic parts and sheet material from us online. Our XL machines can manufacture parts up to a length of 3000mm. Our smallest CO2 laser cuts up to 20mm acrylate, and has a machinable surface of 900x1300mm. The advantage of this small laser cutter is that the height of the work table can drop to approx. 50cm. As a result, in addition to plate work, large and thicker parts can also be cut and engraved. For example, the finishing of injection moulded parts.

We often manufacture rubber and silicone parts for the food industry. Examples of this are gaskets and flexible seals. If desired, cut rubber parts can be cleaned ultrasonically after cutting so that the cutting deposits are removed. Depending on the thickness of the material, we can also bend it for you. As a rule, materials thinner than 3 mm can be bent. Our bending machine can theoretically bend 2500mm; in practice the quality of the bend is reduced at these lengths. The maximum bending length we use is approx. 2000 mm at a thickness of 1 mm and approx. 1000 mm at a thickness of 3 mm. Of course, we will be happy to answer your questions about this.